2000 Honda CB600 F2-Y

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Footrest slightly loose both hangers loose (6.2.12 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

rubber boot missing rear brake caliper

Drive chain slightly loose (6.2.1d)

Exhaust mounting deteriorated. loose can (7.1.1.c)

Exhaust noisy (7.1.2)

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

nail? in front tyre

rubber boot missing from rear caliper

Front Nail in tyre ()

Drive chain slightly loose (6.2.1d)

Exhaust noisy noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

rubber boot missing from rear caliper

two pins missing from front mudguard

Drive chain excessively tight (6.2.1d)

Drive chain worn to excess (6.2.1e)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front shock absorber seal failed and leaking oil (2.3.3)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

very slight play in switch housing

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))