2000 Lexus GS300

Engine management lamp permanently illuminated

Brake hydraulic reservoir close to minimum mark (1.1.10 (d) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Front Registration plate does not conform to the specified requirements Incorrect spacing (0.1 (d))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill / Axle mounting (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Registration plate does not conform to the specified requirements Incorrect spacing (0.1 (d))

Brake hydraulic reservoir close to minimum mark (1.1.10 (d) (i))

Engine management lamp permanently illuminated

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Electronic stability control warning lamp indicates a fault VSC lexus (7.12 (e))

Offside Rear Tyre tread depth below requirements of 1.6mm Centre of tread (5.2.3 (e)) DANGEROUS

MIL light on

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Suspension components corroded front and rear

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Sub-frame corroded but not seriously weakened front and rear (5.3.3 (b) (i))

plastic cover sills fitted preventing a full inspection of the prescribed area

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Sub-frame corroded but not seriously weakened front and rear (5.3.3 (b) (i))

plastic cover sills fitted preventing a full inspection of the prescribed area

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Headlamp lens seriously defective Beam image very weak (4.1.1 (b) (ii))

Nearside Power steering component leaking (2.1.5 (a))

Power steering inoperative (2.1.5 (c) (i))

Registration plate does not conform to the specified requirements Both (0.1 (d))

MIL light on

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Child Seat fitted not allowing full inspection of adult belt ()

Rear Tyre worn close to legal limit/worn on edge Both on 2mm centre of tread (5.2.3 (e))

Nearside Front Brake backing plate corroded and insecure

Nearside Headlamp lens slightly defective Image slightly weaker (4.1.1 (b) (i))

Registration plates letter spacing

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Engine MIL light on

Nearside Front Brake backing plate corroded and insecure

Nearside Headlamp lens slightly defective Image slightly weaker (4.1.1 (b) (i))

Registration plates letter spacing

Both front lower arm ball joints leaking grease

Corrosion on all components

Oil leak, but not excessive Rear diff (8.4.1 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush age cracking and weak (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin all (1.1.13 (a) (ii))

all front and rear suspension components are corroded

corrosion to underside of vehicle and sill panels

Electronic stability control warning lamp indicates a fault (7.12 (e))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush age cracking and weak (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin all (1.1.13 (a) (ii))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

all front and rear suspension components are corroded

corrosion to underside of vehicle and sill panels

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Engine warning light on.

Exhaust tail pipes and joints corroded.

Exhaust has part of the system slightly deteriorated (7.1.1a)

Exhaust front heat shield clamp broken.

Nearside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Exhaust front heat shield clamp broken.

Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Front Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)