2000 Honda Accord

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor (7.1.1 (a) (i))

Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Steering component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Sub Frame (2.1.2 (e) (ii)) DANGEROUS

Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Sub Frame (5.3.6 (a) (ii)) DANGEROUS

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Fuel pipe slightly damaged (7.2.2)

Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Offside Front Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Fuel pipe slightly damaged (7.2.2)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tie bar/rod damaged and seriously weakened (2.4.G.1)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear passenger door cannot be opened from outside the vehicle (6.2.B.1c)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Vehicle's internal headlight adjuster altered to recheck lights

Front Brake pipe slightly corroded (3.6.B.2c)

exhaust rear silencer flange deteriorating

Brakes imbalanced across an axle (3.7.B.5b)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Front Brake pad(s) wearing thin (3.5.1g)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)