2000 Ford Ranger

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement all perished (5.3.4 (a) (i))

Front Tyre slightly damaged/cracking or perishing both front tyres perished (5.2.3 (d) (ii))

Front Upper Suspension arm ball joint dust cover severely deteriorated both front upper ball joint covers (5.3.4 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material brake pipe to flexi corroded (1.1.11 (c))

Offside Rear Rear fog lamp lens defective which has no effect on emitted light cracked (4.5.1 (b) (i))

Front Integral body structure is corroded but structural rigidity is not significantly reduced body to chassis both sides at front (6.1.1 (c) (i))

Front Lower Suspension arm ball joint dust cover severely deteriorated both sides of vehicle (5.3.4 (b) (i))

Front Outer Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt both track rod ends (2.1.3 (g) (i))

Front Tyre slightly damaged/cracking or perishing both front tyres perished (5.2.3 (d) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material to flexible hose (1.1.11 (c))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Rear fog lamp lens defective which has no effect on emitted light cracked (4.5.1 (b) (i))

Rear Exhaust mounting defective exhaust mounting bracket corroded (6.1.2 (a))

Nearside Front Brake pipe corroded, covered in grease or other material to flexible hose (1.1.11 (c))

Offside Rear Rear fog lamp lens defective which has no effect on emitted light (4.5.1 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive shock absorber top mounting area (5.3.6 (a) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement all bushes perished (5.3.4 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material to flexible brake hose (1.1.11 (c))

Offside Rear Rear fog lamp lens defective which has no effect on emitted light (4.5.1 (b) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced both inner wings at body mounts (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Nearside Rear Nail in tyre ()

Offside Seat belt slightly damaged (7.1.2 (b) (i))

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Rear Shock absorber has slight corrosion to the casing both. (2.7.2a)

underside slightly corroded.

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Rear Shock absorber has slight corrosion to the casing both. (2.7.2a)

underside slightly corroded.

Exhaust emits an excessive level of metered smoke for a non-turbo charged engine (7.4.B.3b)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nail in offside rear tyre

rear fog lamp brackets poor condition

Offside Registration plate lamp not working (1.1.C.1d)

rear fog lamp brackets poor condition

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

both front tyres have treads cracking; recommend changing

both rear spring,rear spring eye bushs have play

exhaust rusty,and centre hanging strap rusty

Centre Rear Brake pipe excessively corroded (3.6.B.2c)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Outer Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Rear fog lamp not working (1.3.2b)

all metal brake pipes starting to corrode

front tyres wear on inside edge