2000 Honda CBR600F

Drive chain slightly loose (6.1.7 (c) (i))

Rear Brake fluid below minimum mark (1.1.10 (d) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

slight cracking in front tyre valve

slight cracking in side wall of front tyre

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre valve stem slightly damaged (4.1.2c)

Lower Rear suspension bearing has slight free play (2.4.A2a(i))

Wheel alignment slightly misaligned. (2.5.1)

Lower Rear suspension bearing has slight free play (2.4.A2a(i))

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Steering movement slightly 'notchy' (2.2.1b)

Wheel alignment slightly misaligned. (2.5.1)

Offside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls (2.1.2b)

Rear Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Lower Rear suspension bearing has slight free play (2.4.A2a(i))

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Steering movement slightly 'notchy' (2.2.1a)

Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort (3.3.A1c)

Rear Drive chain slightly loose (6.2.1d)

Rear Lower Rear mono-shock pivot worn but not excessive (2.4.B.4)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Drive chain slightly loose (6.2.1d)

Rear Lower Rear mono-shock pivot worn but not excessive (2.4.B.4)