2000 Land Rover Discovery

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Upper Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Passenger seat(s) missing at time of test Boot compartment seats.

Rear Vehicle structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Exhaust has a minor leak of exhaust gases Rear section above axle. (6.1.2 (a))

Nearside Front Track rod end ball joint has slight play Forward. (2.1.3 (b) (i))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Above rear axle, Close to shock absorber mounting. (6.1.1 (c) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Tyre slightly damaged/cracking or perishing Poor condition cracking & low on tread but no visible cords. (5.2.3 (d) (ii))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Passenger seat(s) missing at time of test Both boot seats.

Vehicle structure slightly corroded within 30cm of towbar mounting Both mountings on to chassis. (6.1.6 (i) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive near shock mount (5.3.6 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Tyre slightly damaged/cracking or perishing badly cracked also has various cuts and cracks but non deep enough to reach cords (5.2.3 (d) (ii))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Tyre worn close to legal limit/worn on edge edges low (5.2.3 (e))

Vehicle structure slightly corroded within 30cm of towbar mounting both chassis rail mount points (6.1.6 (i) (i))

Anti-lock braking system warning lamp does not illuminate (1.6 (a))

Central Rear Upper Suspension component pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Lower Shock absorbers has an excessively worn bush (5.3.2 (c))

Nearside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))

Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Offside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Lower Front suspension has slight movement at a suspension ball joint (2.5.A.1c)

Offside Front Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

nail in n/s/r tyre

oil leak from engine

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

advise nearside rear bump stop missing

advise slight oil leak from tranfer box

Nearside Front Headlamp aim too low (1.8)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Headlamp aim too low (1.8)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

advise nearside rear bump stop missing

advise slight oil leak from tranfer box

First axle pinion seal leak