2000 Mazda E Series

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Body panel corroded and likely to cause injury wheel arch sharp edge (6.2.1 (a) (i))

Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i))

Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Front Body panel corroded and likely to cause injury wheel arch sharp edge (6.2.1 (a) (i))

Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i))

Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Nearside Front Anti-roll bar linkage fractured (5.3.3 (b) (ii)) DANGEROUS

Offside Front Anti-roll bar linkage fractured (5.3.3 (b) (ii)) DANGEROUS

Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt All (2.4.G.2)

Anti-roll bar rubber bush deteriorated but not resulting in excessive movement All (2.4.G.2)

Brake pipe slightly corroded All (3.6.B.2c)

Corrosion all over body, chassis and suspension components

Front Both tyres worn on inside edge

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt All (2.4.G.2)

Anti-roll bar rubber bush deteriorated but not resulting in excessive movement All (2.4.G.2)

Brake pipe slightly corroded All (3.6.B.2c)

Corrosion all over body, chassis and suspension components

Front Both tyres worn on inside edge

Nearside Front wheel bearing has slight play (2.5.A.3c)

Brake pipe slightly corroded rear main feeds. (3.6.B.2c)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

vehicle underbody light corrosion

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Front registration plate deteriorated (6.3.1d)

Nearside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Offside Front Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Rear registration plate deteriorated (6.3.1d)

Brake pipe slightly corroded rear main feeds. (3.6.B.2c)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

vehicle underbody light corrosion

front brake excessively fluctuating (3.7.B.3)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Service brake: efficiency below requirements (3.7.B.7)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

general corrosion to complete chassis, floorpan and inner sills underneath vehicle however all areas not considered excessive

offside rear outersill holed however not affecting vehicle structure

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear wheel bearing has slight play (2.6.2)

Brake load sensing valve linkage seized (3.6.E.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Rear Brake hose excessively deteriorated (3.6.B.4d)

Brake load sensing valve linkage seized (3.6.E.3)

Rear Brake hose excessively deteriorated (3.6.B.4d)

Brake pipe excessively corroded (3.6.B.2c)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

n/s wiper blade worn