2001 Chrysler Grand Voyager

Engine mounting damaged but not to excess Bush splitting (6.1.8 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Corrosion around leaf mountings (6.1.1 (c) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced Inner sill (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill corroded Needs welding (6.1.1 (c) (i))

Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill where it meets the arch corroded. Needs welding (6.1.1 (c) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Exhaust has a minor leak of exhaust gases Rear section slightly blowing (6.1.2 (a))

Front Engine mounting damaged but not to excess Mounting bush split. (6.1.8 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Corrosion around rear leaf mount (6.1.1 (c) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced Inner sill corroded in places (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security corrosion around rear suspension mounts (6.2.2 (d) (i))

Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Shock absorber spring mounting plates badly corroded/ rotten (5.3.6 (a) (i))

Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Shock absorber spring mounting plates badly corroded/ rotten (5.3.6 (a) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer sill corroded around jacking point/ Inner arch (6.2.2 (d) (i))

Front Both front mirrors loose/ Taped on.

Front Registration plate deteriorated but not likely to be misread Plate damaged (0.1 (b))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security corrosion around rear suspension mounts (6.2.2 (d) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Play in steering rack inner joint(s) ()

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust has a minor leak of exhaust gases rear silencer joint (6.1.2 (a))

Nearside Obligatory mirror slightly loose (3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Obligatory mirror slightly loose (3.3 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement slight deteriation (5.3.4 (a) (i))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement slight deteriation (5.3.4 (a) (i))

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Service brake application uneven across the axle (3.7.D.2b)

Offside Front Service brake application uneven across the axle (3.7.D.2b)

Nearside Front Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front disk lipped.

Offside Front disk lipped.

oil leak.

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Rear Lower Shock absorber has a slightly worn bush (2.7.4)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Fuel hose leaking (7.2.3)

Horn not working (1.6.2a)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front Headlamp aim too high (1.8)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Headlamp aim too low (1.8)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Nearside Rear Lower Shock absorber has a slightly worn bush (2.7.4)

Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Wheel nut(s) missing (4.2.A.1e)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)