2000 Mazda MX-5

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Brake lever has insufficient reserve travel (1.1.2 (a))

Driver's airbag missing (7.1.5 (a))

Driver's airbag obviously inoperative (7.1.5 (c))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Headlamp aim too low Both front (4.1.2 (a))

Nearside Front Anti-lock braking system component missing (1.6 (e))

Nearside Front Anti-lock braking system wheel speed sensor missing (1.6 (c))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill/floor area (7.1.1 (a) (i))

Offside Front Anti-lock braking system component missing (1.6 (e))

Offside Front Anti-lock braking system wheel speed sensor missing (1.6 (c))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail (5.3.6 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Service brake lagging in operation (1.2.1 (d))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill/floor area (7.1.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Driver's seat insecure At base, bolts loose (6.2.5 (a) (ii)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Suspension arm ball joint likely to become detached Both front lower missing safety split pin locking devices (5.3.4 (a) (ii)) DANGEROUS

Alloy wheels protrude wheel arches but not excessively

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))

Vehicle has been lowered making inspection process difficult

Oil leak, but not excessive (8.4.1 (a) (i))

Parking brake lever has little reserve travel

Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))

Tyre wheel/tyre protruding beyond wheel arch Both front and rear (5.2.3 (f))

Vehicle has been lowered making inspection difficult

Brake disc significantly and obviously worn Pitted badly and brake pad making very little contact with brake disc material (1.1.14 (a) (i))

Driver's airbag missing (7.1.5 (a))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Nearside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg near anti roll bar mounting (5.3.6 (a) (i))

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Service brake is causing the vehicle to swerve to the nearside (1.2.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))

Tyre wheel/tyre protruding beyond wheel arch Both front and rear (5.2.3 (f))

Vehicle has been lowered making inspection difficult

Front Tyre worn close to the legal limit worn on inner edges (4.1.E.1)

Headlamp deteriorated but light output not reduced both (1.7.5a)

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Parking brake lever has little reserve travel (3.1.6b)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

undertray loose

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded floor (5.2.6)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Offside Registration plate lamp not working (1.1.C.1d)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

all front suspension components corroding

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front Inner Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Inner Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

all front suspension components corroding

Rear Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Nail in offside rear tyre

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Offside Front Brake hose twisted (found during steering lock to lock check) (2.2.D.2b)