2000 BMW 316

Anti-lock braking system wiring damaged but not excessively (1.6 (d))

Electronic stability control warning lamp not working (7.12 (e))

Front Outer Suspension component ball joint dust cover severely deteriorated both (5.3.4 (b) (i))

Front Suspension component pin or bush slightly worn both (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Anti-lock braking system wiring damaged but not excessively (1.6 (d))

Electronic stability control warning lamp not working (7.12 (e))

Front Outer Suspension component ball joint dust cover severely deteriorated both (5.3.4 (b) (i))

Front Suspension component pin or bush slightly worn both (5.3.4 (a) (i))

Offside Front Headlamp aim too far to the right (4.1.2 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Brake pipe slightly corroded both front to rear (3.6.B.2c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Front Brake hose slightly deteriorated (3.6.B.4d)

Tyre worn close to the legal limit all (4.1.E.1)

Front Brake lining(s) less than 1.5 mm thick (3.5.1g)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Rear Brake lining(s) less than 1.5 mm thick (3.5.1g)

Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Front Brake hose slightly deteriorated (3.6.B.4d)

Tyre worn close to the legal limit all (4.1.E.1)

Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Inner Front Track rod end ball joint has slight play (2.2.B.1f)

Rear Brake lining(s) wearing thin (3.5.1g)

Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Rear Brake lining(s) wearing thin (3.5.1g)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Exhaust mounting missing (7.1.1b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Child seat fitted not allowing full inspection of adult belt

Nearside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Lower Sub-frame rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Front Lower Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)