2000 Mercedes-benz Sprinter

Offside Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

body corrosion

headlamp lenses faded

previous repairs covered in underseal

spare wheel bracket corroded

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Front Suspension arm ball joint excessively worn o/s and n/s (5.3.4 (a) (i))

Obligatory mirror seriously damaged, affecting the rear view o/s and n/s (3.3 (b) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Road wheel more than one fixing missing (5.2.1 (a) (ii)) DANGEROUS

Offside Front Road wheel more than one fixing missing (5.2.1 (a) (ii)) DANGEROUS

Offside Rear Road wheel more than one fixing missing (5.2.1 (a) (ii)) DANGEROUS

Offside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS

Rear Integral body structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))

Windscreen wiper blade defective both (3.4 (b) (i))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Outline marker lamp not working (4.2.1 (a))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Outline marker lamp not working (4.2.1 (a))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement Both (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement Both (2.4.G.2)

Bonnet cannot be secured in the closed position (8.4.1)

Front registration plate missing (6.3.1a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear fog lamp not working (1.3.2b)

front brake application uneven (3.7.B.2)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside Front rack end has slight play

Battery insecure (1.9.1)

Brake load sensing valve seized (3.6.E.3)

Headlamp aim too low both (1.8)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner and outer chassis anti roll bar link mounting area (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer box section of rear spring eye mount (2.4.A.3)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner and outer chassis anti roll bar link mounting area (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded outer chassis section of box section (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Registration plate lamp not working (1.1.C.1d)

Seat belt anchorage prescribed area is excessively corroded rear of cab area both sides and middle (5.2.6)

Suspension spring mounting prescribed area is excessively corroded rear cross member areas both sides (2.4.A.3)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

offside front brake pipe corroded

Brake load sensing valve linkage obviously incorrectly adjusted (3.6.E.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake lever has no reserve travel (3.1.6b)

Registration plate lamp not working (1.1.C.1d)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

general under body/chassis corrosion

N/S chassis rail is badly corroded and holed/cracked around fuel tank area

chassis in poor condition

nsf tyre tracked off on inner edge.

Battery insecure (1.9.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Front Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Inner Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Outer Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Front Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Parking brake lever has no reserve travel (3.1.6b)

chassis in poor condition

front anti-roll bar mountings worn

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Obligatory mirror insecure (8.1.1)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Seat belt locking mechanism does not secure or release (5.2.5a)

Registration plate lamp not working (1.1.C.1d)

Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Vehicle structure has slight corrosion (6.1.B.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Registration plate lamp not working (1.1.C.1d)

Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Lower Shock absorber has a slightly worn bush (2.7.4)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

brake cables frayed

front anti-roll links and bushes worn

rear anti-roll bar mounts worn

rear backplates corroded

Centre Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

offside rear mud guird missing

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Side repeater not working (1.4.A.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

offside rear mud guird missing

Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

offside rear hub seal has slight leakage

Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Leaf spring fitted in such a way that the axle is misaligned (2.4.B.1e)

Nearside Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

offside rear hub seal leaking