2000 Ford Ranger

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced gearbox support (6.1.1 (c) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing (6.1.1 (c) (i))

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i))

Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS

Front Integral body structure is corroded but structural rigidity is not significantly reduced cross member (6.1.1 (c) (i))

Fuel Pipe/s corroded

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Vehicle structure is corroded but structural rigidity is not significantly reduced body mount (6.1.1 (c) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner wing (6.1.1 (c) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Tyre slightly damaged/cracking or perishing both rear (5.2.3 (d) (ii))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Brake load sensing valve seized but ABS functioning (1.1.17 (c) (i))

Emissions unable to be completed (8.2.2.2 (e))

Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front spring mount (5.3.6 (a) (i))

Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner wing (6.1.1 (c) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Tyre slightly damaged/cracking or perishing both rear (5.2.3 (d) (ii))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Inner wing rusted

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mount (5.3.6 (a) (i))

Service brake is causing the vehicle to swerve to the nearside (1.2.1 (b) (i))

Front exhaust mount rusted away

Nearside Front Inner wing rusted

Nearside Front flexi brake pipe insecure

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced body mount (6.1.1 (c) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Front Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced gearbox cross member (6.1.1 (c) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced body mount (6.1.1 (c) (i))

Offside Front inner wing rusted/holed

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Body mounting fixings missing second mount (6.2.2 (c) (i))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front number plate slightly cracked.

Nearside Front Outer cv gaiter starting to detertiorate

Offside Front Outer cv gaiter starting to deteriorate

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at front hanger. (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at front hanger. (5.3.6 (a) (i))

Front number plate slightly cracked.

Nearside Front Outer cv gaiter starting to detertiorate

Offside Front Outer cv gaiter starting to deteriorate

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive chassis/spring mount (2.4.A.3)

exhaust box strap/mount rusted.

Offside Front Shock absorber has a slightly worn bush lower bush (2.7.4)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Shock absorber has an excessively worn bush (2.7.4)

Offside Headlamp aim too low (1.8)

Nail in nearside rear tyre

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Shock absorber has a slightly worn bush (2.7.4)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Shock absorber has a slightly worn bush (2.7.4)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Shock absorber has a slightly worn bush (2.7.4)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Shock absorber has a slightly worn bush (2.7.4)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Shock absorber has a slightly worn bush (2.7.4)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Shock absorber has a slightly worn bush (2.7.4)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Shock absorber has a slightly worn bush (2.7.4)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Brake pad(s) wearing thin (3.5.1g)

Brake pipe slightly corroded (3.6.B.2c)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Shock absorber has a slightly worn bush (2.7.4)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)