2000 Yamaha SR125

Rear Brake grabbing severely Squealing and fluctuation (1.2.1 (c))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake binding but not excessively (1.2.1 (f))

Rear reflector missing (4.8.2 (a) (ii))

Front wheel bearings are excessively rough (2.3.5b)

Front wheel bearings have excessive free play (2.3.5b)

Fuel system component leaking carburettor (7.2.1a)

Headlamp aim too low (1.6)

Nearside Front Footrest insecure fitted incorrectly (6.2.1a)

Rear reflector on motorcycle missing (1.4.1)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear suspension component excessively corroded. damper rods (2.4.A.1a)

Registration plate margin less than the minimum requirement (6.3.4g)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake disc(s) has slight run out (3.2.A1m)

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front master cylinder clamp incorrect but master cylinder is secure

Steering headbearing has slight free play (2.2.2)

rear l plate

Front Has slight bind on brake caliper

Nearside Rear Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Offside Rear Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Oil leak

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Registration plate deteriorated (6.3.1d)

Rear Wheel has a slightly eccentric bead rim. (4.2.2)

Drive chain slightly loose (6.2.1d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Drive chain worn but not considered excessive (6.2.1e)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Roller brake test indicates a binding brake (3.3.A1a)

Exhaust is leaking and excessively noisey (7.1.1b)

Rear Rear wheel bearings have excessive free play (2.4.A.2c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))