2000 Chrysler Pt Cruiser

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Play in steering rack inner joint(s)

nsf brake binding slightly

oil pressure warning light on dash

rear bumper support corroded

rear wiper split

vaccum pipe on engine split

Nearside Headlamp aim too high (1.8)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Front constant velocity joint is insecure (2.5.C.1b)

Offside Headlamp aim too high (1.8)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Play in steering rack inner joint(s)

nsf brake binding slightly

oil pressure warning light on dash

rear bumper support corroded

rear wiper split

vaccum pipe on engine split

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

both rear shocker mounts corroded

both rear spring mounts corroded

both trackrod ends rubbers weeping

offside front indicator bulb pale

oil light illuminated

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside front brake application uneven (3.7.B.2)

Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

both rear shocker mounts corroded

both rear spring mounts corroded

both trackrod ends rubbers weeping

offside front indicator bulb pale

oil light illuminated

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Rear rear brake grabbing slightly (3.7.A.5b)

Centre Front Exhaust has a minor leak of exhaust gases (7.1.2)

Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc excessively pitted (3.5.1h)

Nearside Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Body insecure and dangerous to other road users (6.1.B.1b)

Offside Headlamp aim too far to the left (1.8)

Offside Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)