2000 Kawasaki ER5

Brake pedal pivot has excessive free play Excessive travel in rear brake pedal (1.1.1 (b))

Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Headlamp aim too high (4.1.2 (a))

Nearside Rear Shock absorber has a serious fluid leak (5.3.2 (b))

Nearside Rear Shock absorber has negligible damping effect (5.3.2 (b))

Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b))

Offside Rear Shock absorber has negligible damping effect (5.3.2 (b))

Rear Brake excessively binding (1.2.1 (f))

Rear Brake pedal not releasing correctly and functionality of brakes affected Brake pedal not releasing correctly causing rear brake to bind (1.1.2 (b) (ii))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Rear Brake lining(s) less than 1.0 mm thick Rear brake linings worn to excess (1.1.13 (a)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm Rear tyre worn below min limit and cracked between treads (5.2.3 (e)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Front tyre side wall has slight cracking

Nearside Front Front brake caliper slider rubbers perished and torn allowing ingress of dirt

Rear Number plate cracked

Front Brake disc(s) slightly pitted (3.2.A1l)

Rear shock absorber has a slightly reduced damping effect both x 2 (2.4.A.3b)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Motorcycle structure slightly corroded (6.1.1a)

swing arm corroded

Front position lamp incorrect colour blue position bulb fitted (1.1.2a)

swing arm corroded

Headlamp aim too high (1.6)

Exhaust is leaking but is not excessively noisey (7.1.1b)

No lights fitted at time of test

Rear wheel bearings have slight free play (2.4.A.2c)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Roller brake test indicates a severely juddering brake (3.3.A1b)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Front Roller brake test indicates a binding brake (3.3.A1a)

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Rear Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front suspension assembly slightly misaligned (2.3.1)