2000 Honda CBR600F

Exhaust noisy (8.1.1 (a))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Tyre worn close to the legal limit worn down to 2mm in places (5.2.3 (e))

Front Stop lamp not working (4.3.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Exhaust noisy (8.1.1 (a))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Tyre worn close to the legal limit worn down to 2mm in places (5.2.3 (e))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Indicator switch inoperative intermittent on the nearside and not working on the offside (4.4.2 (a) (ii))

Front Position lamp not working (4.2.1 (a))

Front Steering headbearing in such a condition that steering control is adversely affected Upper & Lower race extremely notchy, steering centering badly. (2.2.2 (f) (ii)) DANGEROUS

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front tyre has a cut to tread

Rear Tyre has ply or cord exposed (4.1.2a(iii)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Front Roller brake test Higher brake efficiency normally obtainable. (3.3.A2a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre valve stem slightly damaged (4.1.2c)

headlamp beam image poor

twin bulb rear position and stop lamp has 50% not working

Nearside Rear Direction indicators not working (1.5.1c)

Offside Front Direction indicators not working (1.5.1c)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Drive chain slightly loose (6.2.1d)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Exhaust markings indicating not for road use or similar wording (7.1.4)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)