2000 Alfa Romeo 145

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive g/box (8.4.1 (a) (i))

Oil leak, but not excessive oil filter (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

bake pad wear warning lamp illuminated

Emissions unable to be completed (8.2.1.2 (d))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive g/box (8.4.1 (a) (i))

Oil leak, but not excessive oil filter (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Offside Front Subframe mounting prescribed area is inadequately repaired (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is inadequately repaired Sill to floor (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Electrical wiring insecure and connectors likely to become disconnected ABS wiring (4.11 (a) (ii))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to sill (5.3.6 (a) (i))

Offside Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever ratchet not holding correctly (1.1.6 (a))

Steering column has excessive movement up and down (2.2.2 (a))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Rear Lens loose

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced Floor pan (6.1.1 (c) (i))

Both front inner wheel arches corroded

Exhaust poor condition

Front and rear brake discs corroded on edge

Exhaust corroded

Front Brake hose excessively deteriorated Both (3.6.B.4d)

both front inner wings corroded

exhaust outer skin corroded

front tyres below limit on edge

exhaust corroded

exhaust outer skins corroded

exhaust corroded

exhaust corroded/washer jets partially blocked/floors to sills corroded

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

air bag light on

Nearside Front brake disc slightly pitted (3.5.1h)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc slightly pitted (3.5.1h)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)