2000 Honda Accord

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Obligatory mirror insecure (3.3 (b) (ii))

Offside Front Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Rear Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Brake pipe excessively corroded mark yellow (3.6.B.2c)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

rear brake application uneven (3.7.B.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Steering rack gaiter split (2.2.D.2d)

Rear Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Nearside Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Headlamp aim too low (1.8)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

Nearside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)

Nearside Outer Front Anti-roll bar linkage severely distorted (2.4.G.1)

Nearside Front Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.B2)

Nearside Outer Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)