2000 Mazda MX-5

underbody corrosion

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Windscreen washer not working (3.5 (a))

underbody corrosion

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Rear reflector defective or damaged by more than 50% of the reflecting surface (4.8.1 (a) (ii))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor (6.2.2 (d) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Windscreen washer not working (3.5 (a))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Offside Integral body structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i))

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Central Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

slight oil leak

front brake excessively fluctuating (3.7.B.3)

rear brake excessively fluctuating (3.7.B.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Front Brake pad(s) wearing thin (3.5.1g)

Items removed from driver's view prior to test

front windscreen wiper blades smearing slightly

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Front Brake pad(s) wearing thin (3.5.1g)

Items removed from driver's view prior to test

front windscreen wiper blades smearing slightly

Offside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Outer Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

front brake application uneven (3.7.B.2)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Offside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp aim too high (1.8)

Offside Rear fog lamp not working (1.3.2b)

Offside Stop lamp not working (1.2.1b)

Centre Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Rear Tyre(s) incorrect because a lightweight or space saving wheel is fitted (4.1.A.1b)

Centre Exhaust has part of the system slightly deteriorated (7.1.1a)

Centre Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)