2000 Mercedes-benz Sprinter

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Inner Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive rear most mount (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive rear most mount (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Inner Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive rear most mount (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive rear most mount (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Emissions unable to be completed (8.2.1.2 (d))

Nearside Front Brake hose excessively deteriorated (1.1.12 (b) (ii))

Nearside Rear Body panel corroded and likely to cause injury arch (6.2.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Brake hose excessively deteriorated (1.1.12 (b) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Inner Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i))

Nearside Front Outer Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Rear Rear fog lamp does not emit a steady red light Lamp damaged (4.5.4 (a))

Rear Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Position lamp has a product on the lens or light source but not adversely affecting light intensity lens damaged covered in duck tape (4.2.3 (b) (ii))

Play in steering rack inner joint(s)

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear panel cross member (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holes (5.3.6 (a) (i))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Position lamp has a product on the lens or light source but not adversely affecting light intensity lens damaged covered in duck tape (4.2.3 (b) (ii))

Play in steering rack inner joint(s)

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Brake pipe corroded, covered in grease or other material Brake pipe starting to corrode and covered in grease or other material (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated deteriorated (6.1.7 (g) (i))

Suspension component mounting prescribed area damaged but not considered excessive rear panel (5.3.6 (a) (i))

Front Registration plate insecure damaged (0.1 (a))

Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced front and rear of sills both sides weak due to corrosion (6.1.1 (c) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Brake pipe corroded, covered in grease or other material Brake pipe starting to corrode and covered in grease or other material (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated deteriorated (6.1.7 (g) (i))

Suspension component mounting prescribed area damaged but not considered excessive rear panel (5.3.6 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Suspension component mounting prescribed area is corroded but not considered excessive rear panel corroded (5.3.6 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Suspension component mounting prescribed area is corroded but not considered excessive rear panel corroded (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage has slight play in a ball joint drop link (2.4.G.2)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Brake load sensing valve stiff (3.6.E.3)

Parking brake: efficiency below requirements (3.7.C.1b)

Brake load sensing valve stiff (3.6.E.3)

Brake pedal spongy (3.3.B.1b)

Brakes imbalanced across an axle (3.7.B.5b)

Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Emissions not tested (7.0)

Nearside Front Headlamp aim too low (1.8)

Offside Front Headlamp aim too low (1.8)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Shock absorber has a slightly reduced damping effect (2.7.5)

n/s inner c/v boot slightly detoriated

o/s/f wheel rim slightly damaged

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Rear Exhaust mounting missing (7.1.1b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Parking brake: efficiency below requirements (3.7.B.7)

Offside Parking brake: efficiency below requirements (3.7.B.7)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)