2000 Mazda MX-5

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced both front to rear chassis legs corroded (6.1.1 (c) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Suspension arm corroded but not seriously weakened upper and lower (5.3.3 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Suspension arm corroded but not seriously weakened upper and lower (5.3.3 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing and has a cut not showing cord (5.2.3 (d) (ii))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced subframe (6.1.1 (c) (i))

exhaust heat shield insecure

Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced centre and rear sill holed in 2 places (7.1.1 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced both front to rear chassis legs corroded (6.1.1 (c) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Suspension arm corroded but not seriously weakened upper and lower (5.3.3 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Suspension arm corroded but not seriously weakened upper and lower (5.3.3 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing and has a cut not showing cord (5.2.3 (d) (ii))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced subframe (6.1.1 (c) (i))

exhaust heat shield insecure

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Coolant leak slight leak from bottom hose ()

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced both chassis legs from front to rear corroded (6.1.1 (c) (i))

Nearside Rear Suspension arm corroded but not seriously weakened upper and lower arms corroded (5.3.3 (b) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Suspension arm corroded but not seriously weakened upper and lower arms corroded (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Coolant leak ()

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear boot floor holed and corroded

Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))

Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Coolant leak ()

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

nearside rear boot floor holed and corroded

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Suspension component corroded but not seriously weakened axle (5.3.3 (b) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Suspension component corroded but not seriously weakened axle (5.3.3 (b) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Headlamp lens seriously defective (4.1.1 (b) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm corroded but not seriously weakened upper and lower arms both sides (5.3.3 (b) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced boot floor is holed (6.1.1 (c) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both sides (6.2.2 (d) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened all arms and suspension components (5.3.3 (b) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm corroded but not seriously weakened upper and lower arms both sides (5.3.3 (b) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced boot floor is holed (6.1.1 (c) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both sides (6.2.2 (d) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened all arms and suspension components (5.3.3 (b) (i))

Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Brake lever has insufficient reserve travel (1.1.2 (a))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Rear Body has slight corrosion (6.1.B.2)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Offside Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Offside Stop lamp not working (1.2.1b)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside front brake binding (3.7.B.1)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside front brake binding (3.7.B.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Centre Rear Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

both front outer chassis legs starting to corrode

o/s outer sill starting to corrode

Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

both front outer chassis legs starting to corrode

o/s outer sill starting to corrode

Offside Rear Body has slight corrosion (6.1.B.2)

rear exhaust hanger corroded but not affecting the support of the exhaust system

Offside Rear Body has slight corrosion (6.1.B.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front brake disc slightly pitted (3.5.1h)

Nearside Rear brake disc slightly pitted (3.5.1h)

Offside Front brake disc slightly pitted (3.5.1h)

Offside Rear brake disc slightly pitted (3.5.1h)

Oil leak