2003 Porsche Boxster

Emissions oxygen sensor missing where one was fitted as standard Both lambda sensors missing (8.2.1.1 (a))

Exhaust Lambda reading after 2nd fast idle outside specified limits Sensor reading has a large variance due to no sensors fitted (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Offside Front Brake pipe excessively corroded Chassis pipe (1.1.11 (c))

Offside Windscreen washer not working (3.5 (a))

Rear Exhaust catalytic converter missing where one was fitted as standard No obvious catalytic converters fitted (8.2.1.1 (a))

Brake disc worn, pitted or scored, but not seriously weakened All discs slightly corroded (1.1.14 (a) (ii))

Front Shock absorbers has slight external damage to the casing Both side casings rusty on dampers (5.3.2 (b))

Nearside Rear Lower Suspension arm ball joint has slight play Slight play in joint, more so in jacked position (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material Calliper pipe (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material Chassis pipe (1.1.11 (c))

Nearside Rear Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Suspension rod ball joint has slight play (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Shock absorbers has slight external damage to the casing Both front shock absorbers corroded. (5.3.2 (b))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Suspension rod ball joint has slight play (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Shock absorbers has slight external damage to the casing Both front shock absorbers corroded. (5.3.2 (b))

Front to rear brake pipes slightly corroded

Nearside Rear Inner Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS

Front to rear brake pipes slightly corroded

Front Brake pad(s) wearing thin (3.5.1g)

Inner Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Inner Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Parking brake lever has little reserve travel (3.1.6b)

Nearside Headlamp aim too high (1.8)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Brake pad(s) wearing thin (3.5.1g)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Inner Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Inner Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Parking brake lever has little reserve travel (3.1.6b)

Parking brake lever has little reserve travel (3.1.6b)

Nearside Inner Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS

Offside Inner Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS

Nail in offside rear tyre

Parking brake lever has little reserve travel (3.1.6b)

Parking brake lever has little reserve travel (3.1.6b)

Offside Registration plate lamp not working (1.1.C.1d)

Parking brake lever has little reserve travel (3.1.6b)

tread on nearside front tyre close to wear bars

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

tread on nearside front tyre close to wear bars

Rear Registration plate lamp not working (1.1.5c)

Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Tyre worn close to the legal limit (4.1.E.1)