2010 Honda Civic

Both rear brake disc backplates slightly corroded

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt And Offside front (2.1.3 (g) (i))

Nearside Rear Coil spring corroded And Offside rear (5.3.1 (b) (i))

Offside Rear Nail in tyre

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Front Headlamp aim projected beam image is obviously incorrect Both sides (4.1.2 (c))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Side repeater not working (4.4.1 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Front Headlamp has a product on the lens so that the light output is severely reduced both (4.1.4 (b))

Nearside Rear Sub-frame corroded and seriously weakened axle (5.3.3 (b) (i))

Offside Front Headlamp aim unable to be tested (4.1.2 (b))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

T.P.M.S warning lamp illuminated

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Offside Side repeater not working (4.4.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

T.P.M.S warning lamp illuminated

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Front Tyre tread depth below requirements of 1.6mm 2 (5.2.3 (e)) DANGEROUS

Front position lamp(s) not working (1.1.A.3b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Headlamp not working on dipped beam (1.7.5a)