2000 Mercedes-benz E

Front Anti-roll bar pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Front Brake hose slightly deteriorated both sides (1.1.12 (b) (ii))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake hose slightly deteriorated both sides (1.1.12 (b) (ii))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Headlamp aim projected beam image is obviously incorrect both sides (4.1.2 (c))

Front Headlamp has a product on the lens so that the light output is severely reduced both sides (4.1.4 (b))

Nearside Front Side repeater not working (4.4.1 (a) (ii))

Offside Front Side repeater not working (4.4.1 (a) (ii))

Offside Front Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Front Brake hose slightly deteriorated both sides (1.1.12 (b) (ii))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake hose slightly deteriorated both sides (1.1.12 (b) (ii))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Brake hose slightly deteriorated both sides (1.1.12 (b) (ii))

Front Headlamp lens slightly defective both sides (4.1.1 (b) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake hose slightly deteriorated both sides (1.1.12 (b) (ii))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))

Front Brake hose slightly deteriorated both sides (1.1.12 (b) (ii))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear wing corroded

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake hose slightly deteriorated both sides (1.1.12 (b) (ii))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Front Brake disc significantly and obviously worn both sides (1.1.14 (a) (i))

Front Windscreen washer provides insufficient washer liquid both sides (3.5 (a))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner jacking point (6.1.1 (c) (i))

Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point (6.1.1 (c) (i))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake hose slightly deteriorated both sides (1.1.12 (b) (ii))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear wing corroded

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake hose slightly deteriorated both sides (1.1.12 (b) (ii))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front coil spring fractured (2.4.C.1a)

Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)