2000 Subaru Impreza

Front Windscreen washer not working BOTH (3.5 (a))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Hazard warning lamps operated by more than one switch (4.4.2 (a) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor area (5.3.6 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber upper mounting (inside wheel arch) (5.3.6 (a) (i))

Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber upper mounting (inside wheel arch) (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area damaged but not considered excessive floor / sill area (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area within 30cm of shock absorber mount (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area within 30cm of shock absorber mount (5.3.6 (a) (i))

Nearside Front Inner Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Inner Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Inner Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill / floor (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill / floor (5.3.6 (a) (i))

sill covers fitted

Nearside Front Inner Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Inner Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill / floor (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill / floor (5.3.6 (a) (i))

sill covers fitted

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Tyre(s) of different sizes are fitted on the same axle. space saver fitted (5.2.3 (b))

Offside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Anti-roll bar linkage fractured (2.4.G.1)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Brake pipe excessively corroded (3.6.B.2c)

Exhaust catalytic converter missing where one was fitted as standard (7.1.3)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Power steering component(s) has slight seepage from a component (2.3.3b)

Brake pipe slightly corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

slight damage to inner wall of nsf tyre. †osf lower ball joint has split boot.

steering joint dust cover split/missing