2009 Mazda Bongo

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))

Tyre slightly damaged/cracking or perishing All tyres (5.2.3 (d) (ii))

Front Headlamp lens slightly defective both headlamps (4.1.1 (b) (i))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Tyre slightly damaged/cracking or perishing All tyres (5.2.3 (d) (ii))

Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))

Front Headlamp aim projected beam image is obviously incorrect Both headlamps (4.1.2 (c))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Front Headlamp lens slightly defective both headlamps (4.1.1 (b) (i))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Tyre slightly damaged/cracking or perishing All tyres (5.2.3 (d) (ii))

Both front wipers smearing

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Both front wipers smearing

Rear Brake lining(s) wearing thin (1.1.13 (a) (ii))

Rear Brake lining(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Headlamp aim unable to be tested (4.1.2 (b))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake lining(s) wearing thin (1.1.13 (a) (ii))

Front Headlamp lens slightly defective Both sides minor UV damage (4.1.1 (b) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Front Windscreen washer not working (3.5 (a))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Front Headlamp lens slightly defective Both sides minor UV damage (4.1.1 (b) (i))

Offside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength wheel arch foremost section (5.3.6 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Front Anti-roll bar linkage ball joint has slight play Both sides (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Headlamp lens slightly defective Both sides (4.1.1 (b) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Front Headlamp lens slightly defective Both sides (4.1.1 (b) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Lower Integral body structure is deformed but structural rigidity is not significantly reduced sill section damaged on lower lip (6.1.1 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Inner Road wheel slightly distorted (5.2.2 (c) (i))

Rear spare wheel has age related perishing

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Registration plate lamp not working (1.1.C.1d)