2000 Land Rover Defender

Nearside Front Brake pipe corroded, covered in grease or other material under bonnet, chassis (1.1.11 (c))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced bulkhead, behind drivers seat (6.1.1 (c) (i))

All direction indicators not working (4.4.1 (a) (ii))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Headlamp aim too low (4.1.2 (a))

Hazard warning tell-tale inoperative (4.9.1 (a) (i))

Indicator tell-tale inoperative (4.9.1 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material under bonnet, chassis (1.1.11 (c))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced bulkhead, behind drivers seat (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Power steering component has slight seepage from a component steering box (2.1.5 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Coolant leak

Power steering component has slight seepage from a component steering box (2.1.5 (a))

Rear Prop shaft bearing has slight play (6.1.7 (b) (i))

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger (6.1.B.2)

brake pipes corroded

FRONT PROPSHAFT (REAR JOINT) UNIVERSAL JOINT EXCESSIVELY WORN

Nearside Rear brake pipe corroded (axle)

Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt steering arm (2.2.C.1c)

Windscreen wiper not operating over a large enough area to give an adequate view BOTH (8.2.1c)

Nearside Headlamp aim too high (1.8)

Nearside Rear brake pipe corroded (axle)

Offside Headlamp aim too high (1.8)

brake pipes slightly surface corroded

nearside and offside front brake discs inner face in poor condition

Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis as marked (2.4.A.3)

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting as marked (6.6.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded chassis as marked (2.4.A.3)

Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting as marked (6.6.6)

Offside Headlamp aim too high and too far to the right. (1.8)

nearside and offside front brake discs inner face in poor condition

rear chassis in poor corroded condition

Front brake discs deteriorated/corroded

Both front brake discs deteriorated/corroded

Exhaust deteriorated but not leaking

Ball joint has slight play (2.2.B.1f)

Exhaust system jointing flange between mid and rear corroded.

Nearside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)

Nearside Lower Front passenger door hinge deteriorated but the door can still be readily opened and closed (6.2.B.2)

Offside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)

Offside Lower Front passenger door hinge deteriorated but the door can still be readily opened and closed (6.2.B.2)

Offside Headlamp aim too high and too far to the right. (1.8)

Offside Headlamp aim too low (1.8)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Left foot rail/rock guard heavy corrosion

Right foot rail/rock guard excessive corrosion and fractured on rear support bracket

Left rear brake disc inner and outer face has slight surface rust

Right rear brake disc inner and outer face has slight surface rust

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)