2001 Mazda Bongo

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Passenger's seat insecure (6.2.6 (a) (ii)) DANGEROUS

Rear AXLE HAS SLIGHT SURFACE CORROSION

UNDERCARRAGE HAS BEEN UNDERSEALED

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Horn not working (7.7 (a))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear heat shield loose

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Emissions unable to be completed exhaust leak (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger (6.1.1 (c) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Rear fog lamp does not face the rear (4.5.4 (a))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear heat shield loose

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Rear Anti-roll bar pin or bush excessively worn D x2 (5.3.4 (a) (i))

Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Nearside Front Lower Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Front Suspension arm corroded but not seriously weakened bothsides (2.4.G.1)

undertray and sill trims fitted not allowing a full inspection

Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill area (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded chassis area (2.4.A.3)

Front Suspension arm corroded but not seriously weakened bothsides (2.4.G.1)

undertray and sill trims fitted not allowing a full inspection

Main beam 'tell-tale' not working (1.7.4c)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Oil leak

Front tyres wearing on outer edge

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)