2000 Suzuki Grand Vitara

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

front brake application uneven (3.7.B.2)

Front Brake pad(s) wearing thin (3.5.1g)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

front and rear body mountings getting corroded

front exhaust deteriorated (attention soon needed)

offside front brake binding slightly

suspension components getting corroded

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

front and rear body mountings getting corroded/ non continuous welding outside of prescribed area

front brakes only just pass application test

front exhaust deteriorated

nail in offside rear tyre

nearside front tyre worn low on edge

offside front brake binding slightly

offside front tyre on legal limit on edge

suspension components getting corroded

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Exhaust system not adequately supported (7.1.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

front and rear body mountings getting corroded/ non continuous welding outside of prescribed area

front brakes only just pass application test

front exhaust deteriorated

nail in offside rear tyre

nearside front tyre worn low on edge

offside front brake binding slightly

offside front tyre on legal limit on edge

suspension components getting corroded

Nail in nearside front tyre

Nearside rear brake fluctuating, but not excessively (3.7.B.3)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

brake servo pipe slightly deteriorated

front and rear body mountings getting corroded

front brake binding slightly

other welding repairs outside of prescribed area not continuous

wiper blade split/deteriorated

rear brake application uneven (3.7.B.2)

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Seat belt anchorage prescribed area is inadequately repaired (5.2.6)

wiper blade split/deteriorated

Nail in nearside front tyre

Nearside rear brake fluctuating, but not excessively (3.7.B.3)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

brake servo pipe slightly deteriorated

front and rear body mountings getting corroded

front brake binding slightly

other welding repairs outside of prescribed area not continuous

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

offside front wheel binding

Offside Rear Registration plate lamp not working (1.1.C.1d)

Rear Brake pipe excessively corroded (3.6.B.2c)

Rear Brake pipe fouled by moving parts (3.6.B.2a) DANGEROUS

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

offside front wheel binding

Offside Headlamp aim too low (1.8)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Brake pipe excessively corroded (3.6.B.2c)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

clean and grease rear b/pipes.