2000 Mazda 626

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

rear wheel arches corroded

Brake pipe slightly corroded (3.6.B.2c)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Brake pipe slightly corroded (3.6.B.2c)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nail in offside rear tyre

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Brake pipe slightly corroded (3.6.B.2c)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nail in offside rear tyre

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Headlamp aim not tested (1.8.A.1c)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Registration plate lamp not working (1.1.5c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

before test-fresh paint damage to drivers door

sump corroded

Front Exhaust system not adequately supported (7.1.1)

Nearside Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.B2)

Offside Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.B2)

Tyre worn close to the legal limit (4.1.E.1)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

before test-fresh paint damage to drivers door

sump corroded