MOT Status
ExpiredMileage
125,803 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Offside Front Brake master cylinder/servo mounting prescribed area is inadequately repaired by brake servo (1.1.21 (e) (i))
Offside Rear Upper Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Power steering pipe/hose excessively corroded (2.1.5 (g) (i))
Nearside Front Inner Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Rear Inner Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Rear Inner Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Main chassis leg marked yellow (6.1.1 (c) (i))
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner wheel arch marked yellow (6.2.2 (d) (i))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Main chassis leg marked yellow (6.1.1 (c) (i))
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner wheel arch marked yellow (6.2.2 (d) (i))
Body heavily corroded/ repaired in multiple places
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear rear arches have corrosion, advise, repair
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Headlamp not working on main beam (4.1.1 (a) (ii))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
engine covers and under trays fitted
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
engine covers and under trays fitted
Offside Seat belt anchorage prescribed area is excessively corroded floor to sill (5.2.6)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
engine covers and under trays fitted
Brake hose has slight corrosion to ferrules (3.6.B.4e)
Brake pipe slightly corroded (3.6.B.2c)
Parking brake lever has little reserve travel (3.1.6b)
Rear Brake pad(s) wearing thin (3.5.1g)
Vehicle structure has slight corrosion (6.1.B.2)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS
Nearside Front Mechanical brake component has restricted free movement (3.5.1k) DANGEROUS
Brake hose has slight corrosion to ferrules (3.6.B.4e)
Brake pipe slightly corroded (3.6.B.2c)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Parking brake lever has little reserve travel (3.1.6b)
Rear Brake pad(s) wearing thin (3.5.1g)
Vehicle structure has slight corrosion (6.1.B.2)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Rear registration plate background overprinted or shadowed with text (6.3.1e)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Parking brake lever has little reserve travel (3.1.6b)
front brake discs corroded on inner edges
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Parking brake lever has no reserve travel (3.1.6b)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Offside Rear brake disc excessively pitted (3.5.1h)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda MX-5?
Based on 2,502,760 MOT tests across 160,823 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
X622 CBU is a 2000 Mazda MX-5 in Red with a 1,839cc petrol engine. This vehicle has been through 31 MOT tests with a personal pass rate of 61.3%.
Across all 2000 Mazda MX-5 models, the average MOT pass rate is 72.2% with a typical mileage of 76,778 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda MX-5 fails its MOT is seat belt anchorage prescribed area is excessively corroded, accounting for 44,475 recorded failures. If you're considering buying X622 CBU, it's worth having these areas checked by a mechanic before committing.
The Mazda MX-5 typically stays on UK roads for around 36 years. At 26 years old, this Mazda MX-5 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of X622 CBU?
You can check the full history of X622 CBU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was X622 CBU registered?
X622 CBU is a 2000 Mazda MX-5, first registered on 1 September 2000.
Is X622 CBU safe to buy?
The MOT history for X622 CBU shows 31 tests with a 61.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does X622 CBU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on X622 CBU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.