2000 Vauxhall Tigra

Front Direction indicator slightly discoloured both (1.4.A.2f)

Front Shock absorber has a light misting of oil both (2.7.3)

Front Tyre worn close to the legal limit both inner edges (4.1.E.1)

Brake load sensing valve seized (3.6.E.3)

Front position lamp(s) has less than 50% of the light sources illuminating both (1.1.A.3b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Inner Rear position lamp(s) not working (1.1.A.3b)

Rear Tyre(s) incorrect because tyres with different structures are fitted across the same axle (4.1.A.2a)

Windscreen wiper does not clear the windscreen effectively both (8.2.2)

Front Direction indicator slightly discoloured both (1.4.A.2f)

Front Shock absorber has a light misting of oil both (2.7.3)

Front Tyre worn close to the legal limit both inner edges (4.1.E.1)

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside and offside rear wheel bearing slightly noisy

Battery insecure (1.9.1)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Registration plate lamp not working (1.1.C.1d)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside and offside rear wheel bearing slightly noisy

Battery insecure (1.9.1)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Registration plate lamp not working (1.1.C.1d)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

front brake application uneven (3.7.B.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside front brake fluctuating, but not excessively (3.7.B.3)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside front brake fluctuating, but not excessively (3.7.B.3)

Nearside rear chassis where spring sits slightly corroded

Nearside rear floor slightly corroded

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Brake load sensing valve seized (3.6.E.3)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Rear wheel bearing rough when rotated (2.6.1)

Offside Rear coil spring fractured (2.4.C.1a)

Rear Stop lamp not working (1.2.1b)

Track rod end ball joint has excessive play (2.2.B.1f)

Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Both sides frnt suspension arms inner bushes worn

Oil leak

Rear wheel bearing has slight play (2.6.2)

brake pipes coated in grease/sealant visual ispection impaired

exhaust system corroded

front brake discs starting to corrode

offside and nearside inner sills starting to corrode

offside and nearside inner sills starting to surface corrode

rear suspension areas starting to corrode arounr rear springs

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Stop lamp not working (1.2.1b)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

brake pipes coated in grease/sealant visual ispection impaired

front brake discs starting to corrode

offside and nearside inner sills starting to corrode

offside and nearside inner sills starting to surface corrode

rear suspension areas starting to corrode arounr rear springs

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front brake disc slightly pitted (3.5.1h)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front brake disc slightly pitted (3.5.1h)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front brake disc slightly pitted (3.5.1h)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front brake disc slightly pitted (3.5.1h)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Front position lamp(s) not working (1.1.A.3b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)