MOT Status
ExpiredMileage
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust has a major leak of exhaust gases (7.1.2)
Front Headlamp not working on dipped beam both (1.7.5a)
Horn not working (1.6.2a)
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door (6.1.B.2)
Nearside Front Brake pipe excessively corroded inner wing (3.6.B.2c)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door pillar (6.1.B.2)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill (6.1.B.2)
Nearside Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings inner sill (6.1.B.2)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door (6.1.B.2)
Nearside Rear Brake pipe excessively corroded flexi to caliper (3.6.B.2c)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill (6.1.B.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door (6.1.B.2)
Offside Front Brake pipe excessively corroded inner wing (3.6.B.2c)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door pillar (6.1.B.2)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill (6.1.B.2)
Offside Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings inner sill (6.1.B.2)
Offside Rear Brake pipe excessively corroded flexi to caliper (3.6.B.2c)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door pillar (6.1.B.2)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Vehicle structure has slight corrosion (6.1.A.1)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Vehicle structure has slight corrosion (6.1.A.1)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Vehicle structure has slight corrosion (6.1.A.1)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Vehicle structure has slight corrosion (6.1.A.1)
Front registration plate deteriorated (6.3.1d)
Nearside Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Lower Body has a sharp edge caused by damage (6.1.C.1)
Nearside Inner Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Headlamp not working on main beam (1.7.5a)
Offside Inner Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear rear parking brake recording little or no effort (3.7.B.6a)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
rear brake recording little or no effort (3.7.B.5a)
Oil leak
brake pipes corroded
exhaust corroded
underbody and body badly corroded and weak
Brake load sensing valve stiff (3.6.E.3)
Front Brake pipe slightly corroded (3.6.B.2c)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Headlamp not working on main beam (1.7.5a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is distorted but not considered excessive (2.4.A.3)
Offside Registration plate lamp not working (1.1.C.1d)
both outer sills corroded but not in a perscribed area
middle exhaust mount broke
nearside inner sill corroded but not in a perscribed area
underside of vehicle is corroded in various areas
Brake load sensing valve stiff (3.6.E.3)
Front Brake pipe slightly corroded (3.6.B.2c)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is distorted but not considered excessive (2.4.A.3)
both outer sills corroded but not in a perscribed area
middle exhaust mount broke
nearside inner sill corroded but not in a perscribed area
underside of vehicle is corroded in various areas
Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Vehicle structure has slight corrosion (6.1.A.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
exhaust middle mount is snapped
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Upper Anti-roll bar attachment bracket/mounting nut missing (2.4.G.1)
Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Vehicle structure has slight corrosion (6.1.A.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
exhaust middle mount is snapped
Nearside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nearside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Steering pivot point has excessive play (2.2.B.1g)
Offside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Outer Seat belt anchorage prescribed area is distorted but not considered excessive (5.2.6)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nearside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Outer Seat belt anchorage prescribed area is distorted but not considered excessive (5.2.6)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear brake discs pitted.
Nearside Steering pivot point has slight play (2.2.B.1g)
Offside Rear brake disc slightly pitted (3.5.1h)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
front number plate cracked
Nearside Inner Ball joint has slight play (2.2.B.1f)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear brake disc slightly pitted (3.5.1h)
Nearside Inner Ball joint has slight play (2.2.B.1f)
Nearside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear brake disc slightly pitted (3.5.1h)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Steering pivot point has slight play (2.2.B.1g)
Offside Rear Suspension component mounting prescribed area is distorted but not considered excessive (2.4.A.3)
Oil leak
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Oil leak
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
X669 MAK is a 2000 Mercedes-benz Vito in White with a 2,151cc diesel engine. This vehicle has been through 16 MOT tests with a personal pass rate of 56.3%.
Across all 2000 Mercedes-benz Vito models, the average MOT pass rate is 62.9% with a typical mileage of 111,462 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying X669 MAK, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 26 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of X669 MAK?
You can check the full history of X669 MAK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was X669 MAK registered?
X669 MAK is a 2000 Mercedes-benz Vito, first registered on 2 November 2000.
Is X669 MAK safe to buy?
The MOT history for X669 MAK shows 16 tests with a 56.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does X669 MAK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on X669 MAK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.