MOT Status
ValidMileage
125,564 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner wing (6.1.1 (c) (i))
Nearside Rear Brake pipe excessively corroded to wheel cylinder (1.1.11 (c))
Offside Front Brake hose excessively damaged cut (1.1.12 (b) (ii))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS
Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner wing (6.1.1 (c) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced chassis (6.1.1 (c) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced chassis (6.1.1 (c) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced out rigger (6.1.1 (c) (i))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing (6.1.1 (c) (i))
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point (6.1.1 (c) (i))
Nearside Rear Tyre has ply or cords exposed perished (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced chassis (6.1.1 (c) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced chassis (6.1.1 (c) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced out rigger (6.1.1 (c) (i))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both Front Link Bushes (5.3.4 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced Lower Wheel Arch & Upper Wheel Arch (6.1.1 (c) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Rear Wheel bearing has slight play Both Rear Wheel Bearings (5.1.3 (a) (i))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Nearside Front Headlamp levelling device inoperative (4.1.5 (a))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Headlamp levelling device inoperative (4.1.5 (a))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both Front Link Bushes (5.3.4 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material Body To Axle (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced Lower Wheel Arch & Upper Wheel Arch (6.1.1 (c) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced Lower Wheel Arch & Upper Wheel Arch (6.1.1 (c) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Rear Wheel bearing has slight play Both Rear Wheel Bearings (5.1.3 (a) (i))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing by top strut (5.3.6 (a) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing by sub frame (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing by top strut (5.3.6 (a) (i))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing by top strut (5.3.6 (a) (i))
Brake pipe corroded, covered in grease or other material Fronts and rear on axel (1.1.11 (c))
Wide spread corrosion to underside including front inner arches and outer sills
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Brake pipe corroded, covered in grease or other material Fronts and rear on axel (1.1.11 (c))
Wide spread corrosion to underside including front inner arches and outer sills
various signs of corrosion under side
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))
various signs of corrosion under side
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Vehicle structure has slight corrosion (6.1.A.1)
Body has slight corrosion (6.1.B.2)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Horn not working (1.6.2a)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Headlamp aim too high (1.8)
Offside Headlamp aim too high (1.8)
Vehicle's internal headlight adjuster altered to recheck lights
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Nearside Rear Direction indicators incorrect colour (1.4.A.2f)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Direction indicators incorrect colour (1.4.A.2f)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Offside Front Direction indicator not working (1.4.A.2c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
How Reliable is the Peugeot Boxer?
Based on 1,709,897 MOT tests across 147,582 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
X68 CDV is a 2000 Peugeot Boxer in White with a 1,998cc petrol engine. This vehicle has been through 32 MOT tests with a personal pass rate of 65.6%.
Across all 2000 Peugeot Boxer models, the average MOT pass rate is 69.0% with a typical mileage of 55,626 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot Boxer fails its MOT is windscreen wiper does not clear the windscreen effectively, accounting for 25,662 recorded failures. If you're considering buying X68 CDV, it's worth having these areas checked by a mechanic before committing.
The Peugeot Boxer typically stays on UK roads for around 31 years. At 26 years old, this Peugeot Boxer is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of X68 CDV?
You can check the full history of X68 CDV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was X68 CDV registered?
X68 CDV is a 2000 Peugeot Boxer, first registered on 13 September 2000.
Is X68 CDV safe to buy?
The MOT history for X68 CDV shows 32 tests with a 65.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does X68 CDV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on X68 CDV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.