2000 Honda VT125C

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Rear Exhaust noisy (8.1.1 (a))

Rear Exhaust noisy (8.1.1 (a))

Rear reflector missing (4.8.2 (a) (ii))

Rear Stop lamp remains on when the brakes are released Adjusted rear switch (4.3.2 (a) (iii))

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Front Brake pad(s) close to minimum limit as close to legal limit as you can get (1.1.13 (a))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Front Brake pad(s) close to minimum limit as close to legal limit as you can get (1.1.13 (a))

Rear Stop lamp not working (4.3.1 (a) (ii))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Tyre worn close to the legal limit (5.2.3 (e))

Stop lamp switch does not operate in accordance with the requirements (4.3.2 (a) (i))

Rear Exhaust noisy (8.1.1 (a))

Exhaust noisy (7.1.2)

Rear Wheel spoke slightly loose. (4.2.1b)

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Rear Wheel spoke slightly loose. (4.2.1b)

Front Brake component has restricted free movement and operation is likely to be impeded (3.2.A1h)

Rear Wheel spoke slightly loose. (4.2.1b)

Rear reflector on motorcycle missing (1.4.1)

Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)

Rear Wheel spoke slightly loose. (4.2.1b)

Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Brake component has restricted free movement and operation is likely to be impeded (3.2.A1h)

Front Roller brake test indicates a binding brake (3.3.A1a)

Rear Brake component has restricted free movement and operation is likely to be impeded (3.2.A1h)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Drive chain slightly loose (6.2.1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Wheel spoke slightly loose. (4.2.1b)

Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)