2000 Suzuki VL125

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Handlebar deformed but serviceable Handlebars slightly bent (2.2.1 (c) (i))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Position lamp damaged but function not impaired (4.2.1 (c) (ii))

Wheel alignment slightly misaligned (2.4 (a))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain slightly tight (6.2.1d)

rear rtegistration plate damaged but not likely to be misread

Exhaust is leaking and excessively noisey (7.1.1b)

Rear Drive chain sprocket worn to excess (6.2.1e)

Exhaust excessively deteriorated (7.1.1a)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Stop lamp remains on when the brake is released (1.3.1e)

Drive chain worn but not considered excessive (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Headlamp aim too low (1.6)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Front shock absorber seal failed and leaking oil (2.3.3)

Headlamp aim too high (1.6)

Front suspension has a slightly reduced damping effect (2.3.6c)

Brake hose excessively deteriorated (3.2.B3b)

Front Brake lever cannot be applied smoothly (3.1.3d)

Front Brake lever cannot be released smoothly (3.1.3d)

Headlamp aim too high (1.6)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Registration plate deteriorated (6.3.1d)

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k) DANGEROUS

Front Brake pad(s) contaminated by oil or grease (3.2.A1k) DANGEROUS

Offside Front shock absorber seal failed and leaking oil (2.3.3) DANGEROUS

Stop lamp does not illuminate immediately a brake applies (1.3.1a) DANGEROUS

Stop lamp does not illuminate immediately a brake applies (1.3.1a) DANGEROUS

Front wheel bearings are excessively rough (2.3.5b)