2000 Mercedes-benz Vito

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Horn not working (7.7 (a))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Side repeater not working (4.4.1 (a) (ii))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Rear Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sill x3 (7.1.1 (a) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive sill x3 (7.1.1 (a) (i))

sill covers fitted at time of test

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sill x3 (7.1.1 (a) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive sill x3 (7.1.1 (a) (i))

sill covers fitted at time of test

Nearside Body has slight corrosion (6.1.B.2)

Offside Body has slight corrosion (6.1.B.2)

Rear tyres worn on edge

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Body has slight corrosion (6.1.B.2)

Offside Body has slight corrosion (6.1.B.2)

Rear tyres worn on edge

Brake pipe slightly corroded both front (3.6.B.2c)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Track rod end ball joint has slight play (2.2.B.1f)

Seat belt anchorage prescribed area is corroded but not considered excessive both inner sills (5.2.6)

Seat belt anchorage prescribed area is corroded but not considered excessive both outer sills (5.2.6)

Seat belt anchorage prescribed area is corroded but not considered excessive both rear inner wings (5.2.6)

Suspension component mounting prescribed area is corroded but not considered excessive both front chassis out riggers (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive both front inner wings (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive rear crossmember (2.4.A.3)

Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings BOTH INNER AND OUTER SILLS (6.1.B.2)

Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings OSR CROSS MEMBER (6.1.B.2)

Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear position lamp(s) not working (1.1.A.3b)

Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

rear crossmember

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

osf tyre wall has kerbing damage

Coolant leak

both inner cv boots split

off side and near side sills to floor slight corrosion

Brake load sensing valve linkage seized (3.6.E.3)

Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Offside Front Brake hose kinked (3.6.B.4b)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Coolant leak

both inner cv boots split

off side and near side sills to floor slight corrosion

Nearside Rear Shock absorber has a slightly worn linkage (2.7.4)

Rear Adjustable towbar locating pin slightly worn (6.6.5b)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Headlamp not working on main beam (1.7.5a)

Nearside Front Windscreen wiper blade deteriorated (8.2.2)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Windscreen wiper blade deteriorated (8.2.2)