2000 Fiat Seicento

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Driver's seat insecure (6.2.A.1)

Emissions not tested (7.0)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Headlamp insecure (1.7.3)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Rear wheel bearing has excessive play (2.6.2)

Nearside Rear rear brake recording little or no effort (3.7.B.5a)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Rear wheel bearing has excessive play (2.6.2)

Offside Rear Road wheel bead rim badly distorted (4.2.A.1a)

Offside Rear rear brake recording little or no effort (3.7.B.5a)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

front brake application uneven (3.7.B.2)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Service brake: efficiency below requirements (3.7.B.7) DANGEROUS

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

advise engine eratic iling

Brakes imbalanced across an axle (3.7.B.5b)

Exhaust has a major leak of exhaust gases (7.1.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Parking brake: efficiency below requirements (3.7.B.7)

Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Shock absorber has slight external damage to the casing (2.7.2a)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Centre Rear Seat belt stitching slightly frayed (5.2.2b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front Shock absorber has a slightly reduced damping effect (2.7.5)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Tyre worn close to the legal limit (4.1.E.1)

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front Shock absorber has a slightly reduced damping effect (2.7.5)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Tyre worn close to the legal limit (4.1.E.1)

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Brake pipe excessively corroded (3.6.B.2c)

Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Fuel tank leaking (7.2.3)

Parking brake: efficiency below requirements (3.7.B.7)

Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear coil spring corroded (2.4.C.1b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

heave corrosion to rear suspension

o/s nd n/s front tyres wearing outer and inner edges

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Headlamp aim too low (1.8)

Offside Side repeater not working (1.4.A.2c)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear coil spring corroded (2.4.C.1b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

heave corrosion to rear suspension

o/s nd n/s front tyres wearing outer and inner edges

Brakes imbalanced across an axle (3.7.B.5b)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

front brake pads low

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Registration plate lamp not working (1.1.5c)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Parking brake: efficiency below requirements (3.7.B.7)

front brake pads low

o/s front tyre worn on outer edges