2000 Mercedes-benz E

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp light intensity severely reduced (4.1.4 (a))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

unable to assess outer sills due to covers

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Headlamp lens seriously defective (4.1.1 (b) (ii))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

unable to assess outer sills due to covers

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Brake pipe excessively corroded metal pipe across rear (1.1.11 (c))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Brake pipe excessively corroded to flexi (1.1.11 (c))

Offside Headlamp aim too high (4.1.2 (a))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

rear tyres worn on inner edges

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Wheel stud(s) missing (4.2.A.1e)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

nearside front tyre worn on edges

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

front tyres worn on edges

nearside front floor corroded

nearside rear tyre worn on inner edge

N/S/R Tyre cracked slightly.