MOT Status
ExpiredMileage
74,847 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Upper Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement NSR / OSR body to arm bush (5.3.4 (a) (i))
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Upper Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement NSR / OSR body to arm bush (5.3.4 (a) (i))
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill/ Jacking point (6.1.1 (c) (i))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill/ Jacking point (6.1.1 (c) (i))
Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Nearside Rear Bearing not checked due to excessive binding at wheel
Nearside Rear Brake pipe corroded, covered in grease or other material Slight corrosion (1.1.11 (c))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Outer sill covers fitted to vehicle
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm front bush (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm front bush (5.3.4 (a) (i))
undertrays and sill covers fitted obscuring from inspection
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
undertrays and sill covers fitted obscuring underside from inspection
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge very low smooth inner edge (5.2.3 (e))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge low smooth inner edge (5.2.3 (e))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
undertrays and sill covers fitted obscuring underside from inspection
Nearside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))
Nearside Rear Brake pipe corroded, covered in grease or other material slightly corroded (1.1.11 (c))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
undertrays and sill covers fitted obscuring underside from inspection
Front Oil leak, but not excessive front of engine (8.4.1 (a) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement lower radius arm inner bush (5.3.4 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement lower radius arm inner bush (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt leaking grease (6.1.7 (g) (ii))
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Front Oil leak, but not excessive front of engine (8.4.1 (a) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement lower radius arm inner bush (5.3.4 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement lower radius arm inner bush (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Nearside Rear Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Offside Rear Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak ()
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Front Exhaust has a major leak of exhaust gases flexi broken (7.1.2)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Nearside Rear Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Offside Rear Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak ()
Front Exhaust has a minor leak of exhaust gases flex (7.1.2)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive floor corner (2.4.A.3)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor corner (2.4.A.3)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Front Exhaust has a minor leak of exhaust gases flex (7.1.2)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive floor corner (2.4.A.3)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor corner (2.4.A.3)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit low outer edge (4.1.E.1)
Nearside Front Anti-lock braking system component excessively damaged (3.4.2)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Headlamp aim too high (1.8)
Offside Headlamp aim too high (1.8)
Nearside Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
nearside rear and offside front brake pipes are corroded
offside rear arm bush is split
wipers starting to smear
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Front Brake pad(s) wearing thin (3.5.1g)
Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Rover 45?
Based on 849,212 MOT tests across 72,661 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
X737 YAT is a 2000 Rover 45 in Red with a 1,396cc petrol engine. This vehicle has been through 27 MOT tests with a personal pass rate of 63%.
Across all 2000 Rover 45 models, the average MOT pass rate is 70.0% with a typical mileage of 69,523 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Rover 45 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 48,934 recorded failures. If you're considering buying X737 YAT, it's worth having these areas checked by a mechanic before committing.
The Rover 45 typically stays on UK roads for around 26 years. At 26 years old, this Rover 45 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of X737 YAT?
You can check the full history of X737 YAT by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was X737 YAT registered?
X737 YAT is a 2000 Rover 45, first registered on 25 October 2000.
Is X737 YAT safe to buy?
The MOT history for X737 YAT shows 27 tests with a 63% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does X737 YAT have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on X737 YAT. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.