2000 Mazda Motor Caravan

Front Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Front Integral body structure is corroded but structural rigidity is not significantly reduced cross member (6.1.1 (c) (i))

Offside Front Headlamp lens slightly defective deteriorated (4.1.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component corroded but not seriously weakened all components front and rear (5.3.3 (b) (i))

Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced cross member (6.1.1 (c) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Headlamp lens slightly defective deteriorated (4.1.1 (b) (i))

Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive spring mount , ( suspension arm ) (5.3.6 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear fog light damaged

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe , ( inner sill ) (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe , ( inner sill ) (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension arm , ( inner sill ) (5.3.6 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced cross member (6.1.1 (c) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Headlamp lens slightly defective deteriorated (4.1.1 (b) (i))

Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive spring mount , ( suspension arm ) (5.3.6 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear fog light damaged

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Position lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Play in steering rack inner joint(s) ()

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Play in steering rack inner joint(s) ()

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Central Exhaust has a minor leak of exhaust gases flexi pipe area (6.1.2 (a))

Nearside Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension component pin or bush slightly worn Trailing arm (5.3.4 (a) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Nearside Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension component pin or bush slightly worn Trailing arm (5.3.4 (a) (i))

Items removed from driver's view prior to test ()

Items removed from driver's view prior to test

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front position lamp(s) not working (1.1.A.3b)

Rear fog lamp does not face the rear (1.3.2a)

Nearside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Nearside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Offside Towbar assembly inappropriately modified (6.6.7)

Rear fog lamp obscured more than 50% (1.3.2c)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Items removed from driver's view prior to test

Passenger seat(s) missing at time of test

rear brake pads worn slightly

tow bar fitted

boot liner trim fitted preventing a full inspection of the rear suspension upper mounts

engine undertray fitted

unable to view the front to rear fuel and brake lines fully

unable to view the under bonnet fuel and brake lines fully

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)