2000 Mazda Bongo

Central Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Nearside Rear wheel arch corroded

Offside Rear wheel arch corroded

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Cross Member (6.1.1 (c) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Lower Outer Wheel Arch Corroded

Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt Split (5.3.4 (b) (ii))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Cross Member (6.1.1 (c) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Lower Outer Wheel Arch Corroded

Nearside Headlamp light source and lamp not compatible (4.1.4 (c))

Offside Headlamp light source and lamp not compatible hid lamps fitted (4.1.4 (c))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Inner Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Rear brkae binding slightly

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Centre Rear Exhaust has a major leak of exhaust gases (7.1.2)

Emissions not tested (7.3.A.1)

Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Headlamp excessively damaged so that the light output is severely reduced (1.7.5a)

Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)