2000 Mazda MX-5

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened all suspension arms corroded (5.3.3 (b) (i))

Emissions unable to be completed (8.2.1.2 (d))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened all suspension arms corroded (5.3.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both sides rusted (1.1.14 (a) (ii))

Outer Integral body structure is repaired but structural rigidity is not significantly reduced both sides outer sills & quarter panels have been previously patch weld repaired. (6.1.1 (d) (i))

general underbody rusting

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension arm corroded but not seriously weakened ALL (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

FRONT AND REAR BRAKE HOSES ARE PERISHING

FRONT AND REAR SUSPENSION COMPONENTS ARE RUSTY

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))

FRONT AND REAR BRAKE HOSES ARE PERISHING

FRONT AND REAR SUSPENSION COMPONENTS ARE RUSTY

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Central Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Nail in tyre ()

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

h/lamps discoloured

sills,floor/chassis/inner arch seams,subframes,suspension,rear brake pipes,rear discs-corroded

unable to assess prior repairs due to sealant etc,refer also prior fail/advise

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Registration plate lamp not working (1.1.C.1d)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

h/lamps discoloured

sills,floor/chassis/inner arch seams,subframes,suspension,rear brake pipes,rear discs-corroded

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nail in offside rear tyre

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Inner Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nail in offside rear tyre

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Under-trays fitted obscuring some underside components

front pads wear

rear exhaust corroded,underbody seams/subframe/suspension corrosion

reqar crossaxle brake pipe corroded/poor

sills prior repairs

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

o/s/f tyre worn inner edge

rear brake pipes corroded

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

rear number plate starting to de-laminate.

Rear Brake pad(s) wearing thin (3.5.1g)