2003 Jaguar X-type

Rear Suspension component mounting repair covered in underseal Underside covered in underseal. (5.3.6 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Windscreen washer not working (3.5 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Suspension component mounting repair covered in underseal Underside covered in underseal. (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

vehicle heavily undersealed

Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill front to back (5.3.6 (a) (i))

Nearside Rear Sub-frame corroded and seriously weakened holed (5.3.3 (b) (i))

Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill front to back (5.3.6 (a) (i))

Offside Rear Sub-frame corroded and seriously weakened holed (5.3.3 (b) (i))

Offside Rear Suspension arm corroded and seriously weakened holed (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge outer edge worn (5.2.3 (e))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

underside of vehicle covered in underseal

previous repairs covered in underseal

Nearside Rear Lower Suspension arm corroded and seriously weakened holed (5.3.3 (b) (i))

Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

previous repairs covered in underseal

Nearside Front Lower Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Nearside Front Lower Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Windscreen washer not working (3.5 (a))

Nearside Rear Inner Tyre tread depth below requirements of 1.6mm edge (5.2.3 (e)) DANGEROUS

Offside Rear Inner Tyre tread depth below requirements of 1.6mm edge (5.2.3 (e)) DANGEROUS

Nearside Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

both rear tyres are worn on the inner edges

Nearside Rear Lower Tie bar/rod has excessive play in a pin/bush (2.4.G.2)

Offside Rear Lower Tie bar/rod has excessive play in a pin/bush (2.4.G.2)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

both rear tyres are worn on the inner edges

Front Brake pad(s) wearing thin (3.5.1g)

Non obligatory mirror damaged

Rear Brake pad(s) wearing thin (3.5.1g)

Tyre worn close to the legal limit (4.1.E.1)

front brake discs are worn and pitted on the inner edge

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nail in offside rear tyre

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Fuel system component leaking (7.2.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)