2000 Suzuki VL125

Rear Drive chain sprocket worn, but not excessively cush drive (6.1.7 (c) (i))

Wheel alignment slightly misaligned (2.4 (a))

Front Brake binding but not excessively (1.2.1 (f))

Rear Mudguard insecure ()

Steering movement slightly 'notchy' (2.2.1b)

front frame welded

Front Brake lever cannot be applied smoothly (3.1.3d)

Headlamp aim too low (1.6)

Horn not loud enough to be heard by another road user (1.7.3a)

Nearside Rear Footrest missing (6.2.1a)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Steering movement slightly 'notchy' (2.2.1b)

front frame welded

Exhaust noisy (7.1.2)

Front forks pitted and corroded

Nearside Rear passenger footrest missing but no passenger seat fitted

Offside Front Front shock absorber has light misting of stanchion slight misting (2.3.3)

chain and sprockets worn

clutch operation is a little stiff

front brake binding slightly

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Front Brake pad(s) contaminated by oil or grease (3.2.A1k)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front wheel bearings are excessively rough (2.3.5b)

Front wheel bearings have excessive free play (2.3.5b)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front forks pitted and corroded

Nearside Rear passenger footrest missing but no passenger seat fitted

Rear Tyre worn close to the legal limit (4.1.3(ii))

front tyre worn uneavenly

n/s/r foot rest missing but bike set up for one rider

Drive chain excessively tight (6.2.1d)

Front Upper Front suspension assembly component loose (2.3.1)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Brake reaction bracket securing bolt(s) loose (3.2.A1j)

front tyre worn uneavenly

n/s/r foot rest missing but bike set up for one rider

Drive chain slightly tight (6.2.1d)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Offside Front shock absorber seal failed and leaking oil (2.3.3)