2000 Honda CBR600F

Drive chain excessively loose (6.1.7 (c) (i))

Throttle operating incorrectly (6.2.7 (a) (i))

Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) DANGEROUS

Front Stop lamp not working (4.3.1 (a) (ii))

Offside Front Brake pad(s) contaminated (1.1.13 (b))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Front Tyre worn close to the legal limit @1.25mm just off centre (5.2.3 (e))

Nearside Rear Direction indicator insecure (4.4.1 (c) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Front Steering operation impeded by a fairing (2.1.4 (e))

Headlamp aim too high (4.1.2 (a))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Head bearings slightly notchy

Front Head bearing slightly nochy

Steering movement slightly 'notchy' (2.2.1b)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Steering movement slightly 'notchy' (2.2.1b)

Exhaust noisy (7.1.2)

Exhaust noisy (7.1.2)

Front Brake disc(s) has excessive run out (3.2.A1m)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Offside Rear Direction indicator incorrect colour (1.5.1b)

Rear Brake master cylinder fluid level low (3.2.B1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering headbearing has slight free play (2.2.2)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Steering movement slightly 'notchy' (2.2.1b)

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front Tyre worn close to the legal limit (4.1.3(ii))