2000 Honda C90

Front Brake lining(s) less than 1.5 mm thick (3.2.A1f(i))

Handlebar mounting clamp bolt loose (2.1.1a)

Rear Brake lining(s) less than 1.5 mm thick (3.2.A1f(i))

Brake lever has inadequate reserve travel (3.1.3b)

Front Roller brake test indicates a sticking brake (3.3.A1a)

Front Stop lamp remains on when the brake is released (1.3.1e)

Front suspension assembly excessive wear or free play in a front suspension component (2.3.4)

Front wheel bearings have excessive free play (2.3.5b)

Handlebar mounting clamp bolt loose (2.1.1a)

Headlamp aim too low (1.6)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Nearside Front Direction indicator affected by the operation of another lamp (1.5.1c)

Nearside Rear Direction indicator affected by the operation of another lamp (1.5.1c)

Nearside Steering lock stop ineffective (2.1.3)

Offside Front Direction indicator affected by the operation of another lamp (1.5.1c)

Offside Rear Direction indicator affected by the operation of another lamp (1.5.1c)

Offside Steering lock stop ineffective (2.1.3)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Riders seat insecure (6.2.1a)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front suspension assembly component excessively bent (2.3.1) DANGEROUS

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) DANGEROUS

Exhaust is leaking but is not excessively noisey (7.1.1b)

Floor brake test No brake control achieves an efficiency of 30%. (3.3.C1a)

Front Brake lining(s) less than 1.5 mm thick (3.2.A1f(i))

Handlebar mounting clamp bolt loose (2.1.1a)

Rear Brake lining(s) less than 1.5 mm thick (3.2.A1f(i))

Front suspension assembly component excessively bent (2.3.1)

Wheel alignment incorrect which adversely affects the handling (2.5.1)