MOT Status
ExpiredMileage
119,316 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced under vehicle (6.1.1 (c) (i))
Hydraulic leak, but not excessive (8.4.1 (a) (i))
Nearside Front door step coroded
Rear chassis heavily corroded and welded
Front Seat belt anchorage prescribed area is corroded but not considered excessive all body and floor (7.1.1 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Brake pipe corroded, covered in grease or other material front to rear x2 (1.1.11 (c))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive (1.1.21 (e) (i))
Play in steering rack inner joint(s) ()
Rear Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
all body corroded
Brake load sensing valve seized but ABS functioning (1.1.17 (c) (i))
Nearside Fuel pipe insecure going to fuel tank (6.1.3 (a) (i))
Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded (1.1.21 (e) (i))
Nearside Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b))
Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))
Nearside Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))
Offside Front Upper Outline marker lamp not working (4.2.1 (a))
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Rear Outer Body has an unsafe modification (6.2.1 (d) (i))
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear (5.3.6 (a) (i))
Front Seat belt anchorage prescribed area is corroded but not considered excessive all body and floor (7.1.1 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Brake pipe corroded, covered in grease or other material front to rear x2 (1.1.11 (c))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive (1.1.21 (e) (i))
Play in steering rack inner joint(s) ()
Rear Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
all body corroded
Body has slight corrosion (6.1.B.2)
Front Brake pipe slightly corroded all metal pipes (3.6.B.2c)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Brake pipe slightly corroded front to rear x2 (3.6.B.2c)
Nearside Rear Brake actuating linkage mounting prescribed area is corroded but not considered excessive (3.3.A.2)
Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive (3.1.9)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.B.2)
Battery insecure (1.9.1)
Central Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre (6.1.B.2)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Rear position lamp(s) insecure (1.1.A.3a)
Offside Rear fog lamp not working (1.3.2b)
Body has slight corrosion (6.1.B.2)
Front Brake pipe slightly corroded all metal pipes (3.6.B.2c)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Brake pipe slightly corroded front to rear x2 (3.6.B.2c)
Nearside Rear Brake actuating linkage mounting prescribed area is corroded but not considered excessive (3.3.A.2)
Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive (3.1.9)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.B.2)
Body has slight corrosion (6.1.B.2)
Body has slight corrosion all body mounts (6.1.B.2)
Brake actuating linkage mounting prescribed area is corroded but not considered excessive (3.3.A.2)
Brake pipe slightly corroded all metal pipes (3.6.B.2c)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive (3.1.9)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.A.1)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Rear Rear position lamp(s) adversely affected by the operation of another lamp with indicator (1.1.A.3f)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Body has slight corrosion (6.1.B.2)
Body has slight corrosion all body mounts (6.1.B.2)
Brake actuating linkage mounting prescribed area is corroded but not considered excessive (3.3.A.2)
Brake pipe slightly corroded all metal pipes (3.6.B.2c)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive (3.1.9)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.A.1)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded (3.3.A.2)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Inner Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Outer Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Rear fog lamp not working (1.3.2b)
Offside Rear Rear position lamp(s) adversely affected by the operation of another lamp with indicator (1.1.A.3f)
Offside Rear Suspension spring mounting prescribed area is excessively corroded x2 (2.4.A.3)
Rear Suspension spring mounting prescribed area is excessively corroded crossmember (2.4.A.3)
Body has slight corrosion (6.1.B.2)
Body has slight displacement of the body relative to the chassis (6.1.B.1a)
Brake pipe slightly corroded all metal pipes (3.6.B.2c)
Brake pipe slightly corroded all metal pipes (3.6.B.2c)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive (3.1.9)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.B.2)
Body has slight corrosion (6.1.B.2)
Brake pipe slightly corroded all metal pipes (3.6.B.2c)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Brake actuating linkage mounting prescribed area is corroded but not considered excessive (3.3.A.2)
Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive (3.1.9)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.A.1)
off side front tyre worn on inner edge
slight play in off side rack end
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre (6.1.B.2)
Offside Rear Direction indicator adversely affected by the operation of another lamp (1.4.A.2h)
Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Body has slight corrosion (6.1.B.2)
Brake pipe slightly corroded all metal pipes (3.6.B.2c)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Brake actuating linkage mounting prescribed area is corroded but not considered excessive (3.3.A.2)
Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive (3.1.9)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.A.1)
off side front tyre worn on inner edge
slight play in off side rack end
Body has slight corrosion (6.1.B.2)
Body has slight corrosion (6.1.B.2)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Brake pipe slightly damaged (2.2.D.2b)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Vehicle structure has slight corrosion (6.1.A.1)
Battery insecure (1.9.1)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear fog lamp not working (1.3.2b)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Body has slight corrosion (6.1.B.2)
Body has slight corrosion (6.1.B.2)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Brake pipe slightly damaged (2.2.D.2b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Vehicle structure has slight corrosion (6.1.A.1)
Body has slight corrosion (6.1.B.2)
Body has slight corrosion (6.1.B.2)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.A.1)
Body has slight corrosion (6.1.B.2)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake actuating linkage mounting prescribed area is corroded but not considered excessive (3.3.A.2)
Nearside Rear Shock absorber has slight external damage to the casing (2.7.2a)
Offside Rear Shock absorber has slight external damage to the casing (2.7.2a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive (3.1.9)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.A.1)
Front Suspension component mounting prescribed area modified, but not inappropriately (2.4.A.3)
Offside Front Brake hose slightly chafed (3.6.B.4d)
Rear Shock absorber has slight external damage to the casing (2.7.2a)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area modified, but not inappropriately (2.4.A.3)
Nearside Front Brake hose twisted (found during steering lock to lock check) (2.2.D.2b)
Nearside Front Upper Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Front Leaf spring anchor bracket corroded and seriously weakened (2.4.B.6d)
Offside Inner Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Shock absorber has slight external damage to the casing (2.7.2a)
Offside Front Brake hose slightly chafed (3.6.B.4d)
Offside Rear Shock absorber has slight external damage to the casing (2.7.2a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.A.1)
Brake pipe slightly corroded (3.6.B.2c)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.A.1)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Leaf spring fractured (2.4.B.1a)
Parking brake: efficiency below requirements (3.7.B.7)
Brake pipe slightly corroded (3.6.B.2c)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.A.1)
Brake pipe slightly corroded (3.6.B.2c)
Oil leak
Vehicle structure has slight corrosion (6.1.A.1)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Leaf spring shackle bracket loose (2.4.B.6a)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Rear fog lamp missing (1.3.2a)
Brake pipe slightly corroded (3.6.B.2c)
Oil leak
Vehicle structure has slight corrosion (6.1.A.1)
Front brake disc slightly pitted (3.5.1h)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Oil leak
Rear brake disc slightly pitted (3.5.1h)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Front Brake cable has wires broken and is significantly weakened (3.5.1b)
Front brake disc excessively pitted (3.5.1h)
Nearside Rear Leaf spring shackle bracket loose (2.4.B.6a)
Rear brake disc excessively pitted (3.5.1h)
Service brake: efficiency below requirements (3.7.B.7)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Brake pipe slightly corroded (3.6.B.2c)
Offside Windscreen wiper blade deteriorated (8.2.2)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Service brake: efficiency below requirements (3.7.B.7)
How Reliable is the Mercedes-benz Sprinter?
Based on 4,037,050 MOT tests across 408,496 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
X831 NES is a 2000 Mercedes-benz Sprinter in Green with a 2,151cc diesel engine. This vehicle has been through 27 MOT tests with a personal pass rate of 59.3%.
Across all 2000 Mercedes-benz Sprinter models, the average MOT pass rate is 65.7% with a typical mileage of 157,576 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Sprinter fails its MOT is parking brake: efficiency below requirements, accounting for 175,127 recorded failures. If you're considering buying X831 NES, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Sprinter typically stays on UK roads for around 30 years. At 26 years old, this Mercedes-benz Sprinter is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of X831 NES?
You can check the full history of X831 NES by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was X831 NES registered?
X831 NES is a 2000 Mercedes-benz Sprinter, first registered on 11 October 2000.
Is X831 NES safe to buy?
The MOT history for X831 NES shows 27 tests with a 59.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does X831 NES have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on X831 NES. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.