2000 Volvo C70

Electronic stability control warning lamp indicates a fault (7.12 (e))

Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Tyre worn close to legal limit/worn on edge Both front (5.2.3 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Tyre worn close to legal limit/worn on edge Both front (5.2.3 (e))

Axle swivel pins and bushes swivel pin and/or bush slightly worn Both (5.1.2 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Tyre worn close to legal limit/worn on edge Both front (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Central Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Central Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Brake pedal spongy (3.3.B.1b)

Offside Rear coil spring broken (2.4.C.1a)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

both rear tyres & offside front tyre worn on inner edge

Brake pedal spongy (3.3.B.1b)

Rear Brake pad(s) wearing thin (3.5.1g)

both rear tyres & offside front tyre worn on inner edge

rear tyres close to limit

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)