2000 Fiat Ducato

welding/repairs covered in underseal

Brake pipe corroded, covered in grease or other material ALL (1.1.11 (c))

Exhaust hangers deterated

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Underside has been covered with EXCESSIVE UNDERSEAL

Brake performance unable to be tested (1.2.1 (g))

Nearside Front Subframe mounting prescribed area is inadequately repaired jacking point area (5.3.6 (a) (i))

Nearside Suspension component mounting prescribed area is inadequately repaired Inner arch (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area is inadequately repaired Jacking point area x2 (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is inadequately repaired inner arch (5.3.6 (a) (i))

Nearside Front Subframe mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected Subframe mount/brake flexies mounting area (5.3.6 (a) (ii)) DANGEROUS

Offside Front Subframe mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected Subframe mount area/Brake flexie area (5.3.6 (a) (ii)) DANGEROUS

Brake pipe corroded, covered in grease or other material ALL (1.1.11 (c))

Exhaust hangers deterated

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Underside has been covered with EXCESSIVE UNDERSEAL

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is inadequately repaired 30cm of subframe jacking point (5.3.6 (a) (i))

Offside Front Cab steps in such a condition that it is likely to cause injury sill (6.2.8 (b))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Brake pipe corroded, covered in grease or other material all pipes (1.1.11 (c))

Exhaust mounting defective (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Side chassis rail (6.2.2 (d) (i))

Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch to brake flexi hose bracket (6.1.1 (c) (i))

Offside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Jacking point (6.1.1 (c) (i))

Offside Front Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch (6.1.1 (c) (i))

Front Coil spring corroded (5.3.1 (b) (i))

Front Coil spring corroded both (5.3.1 (b) (i))

Front Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

front brake backing plates corroded

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Coil spring corroded both (5.3.1 (b) (i))

Front Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

rear exhaust bracket corroded but secure

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Coil spring corroded both (5.3.1 (b) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

rear exhaust bracket corroded

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Coil spring corroded both (5.3.1 (b) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Rear Exhaust system insecure (6.1.2 (a))

rear exhaust bracket corroded

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

exhaust box outer skin deteriorated

near side front brake backing plate corroded

Front Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced inner wing (6.1.1 (c) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Front Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Offside Front Vehicle structure has slight corrosion sill/floor (6.1.B.2)

Rear Brake hose has slight corrosion to ferrules all (3.6.B.4e)

Rear Brake pipe slightly corroded across axle (3.6.B.2c)

exhaust box outer skin deteriorated

Front coil spring corroded both (2.4.C.1b)

rear exhaust box outer skin deteriorated slightly also bracket

Brake hose has slight corrosion to ferrules all (3.6.B.4e)

Front coil spring corroded both (2.4.C.1b)

exhaust box deteriorated

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Inner Front Lower Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Outer Front Lower Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Inner Front Lower Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Outer Front Lower Brake hose has slight corrosion to ferrules (3.6.B.4e)

the exhaust middel box is corroded with a small hole

the nsf lower and upper flitch is corroded but not holed

the nsf osf and nsr tyres are cracking

the nsf osf and osr wheel bearings have slight play

the osf lower flitch is corroded with a small hole but not in a prescribed area

Offside Front Lower Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Inner Front Lower Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Outer Front Lower Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Inner Front Lower Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Outer Front Lower Brake hose has slight corrosion to ferrules (3.6.B.4e)

the exhaust middel box is corroded with a small hole

the nsf lower and upper flitch is corroded but not holed

the nsf osf and nsr tyres are cracking

the nsf osf and osr wheel bearings have slight play

the osf lower flitch is corroded with a small hole but not in a prescribed area

Nearside Front Lower Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Inner Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Inner Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Outer Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Outer Front Brake pipe slightly corroded (3.6.B.2c)

Offside Inner Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Inner Front Brake pipe slightly corroded (3.6.B.2c)

Offside Outer Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Outer Front Brake pipe slightly corroded (3.6.B.2c)

the exhaust middel box is corroded

the nsf chassis is very corroded but not holed

the nsf lower flitch corroded but not holed

the osf chassis is corroded but not holed

the osf cross member is very corroded and holed but not in a prescribed area

Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Upper Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Lower Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Inner Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Inner Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Outer Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Outer Front Brake pipe slightly corroded (3.6.B.2c)

Offside Inner Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Inner Front Brake pipe slightly corroded (3.6.B.2c)

Offside Outer Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Outer Front Brake pipe slightly corroded (3.6.B.2c)

the exhaust middel box is corroded

the nsf chassis is very corroded but not holed

the nsf lower flitch corroded but not holed

the osf chassis is corroded but not holed

the osf cross member is very corroded and holed but not in a prescribed area

Brake pipe slightly corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

front radiator support crossmember badly corroded

nearside front chassis leg slightly corroded close to gearbox mounting

nearside front chassis slightly corroded close to subframe mounting

nearside front step slightly corroded underside vehicle

offside front chassis slightly corroded close to subframe mounting

offside front step slightly corroded underside vehicle

offside front tyre outer sidewall slight cracking

tail pipe exhaust clamp corroded(split)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Brake pipe slightly corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

front radiator support crossmember badly corroded

nearside front brake binding slightly

nearside front chassis leg slightly corroded close to gearbox mounting

nearside front chassis slightly corroded close to subframe mounting

nearside front step slightly corroded underside vehicle

offside front chassis slightly corroded close to subframe mounting

offside front step slightly corroded underside vehicle

offside front tyre outer sidewall slight cracking

tail pipe exhaust clamp corroded(split)

Inner Front Upper Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

the exhaust tail pipe is corroded

the nsf and osf steps are corroded but not holed

the nsf chassis is corroded by the gear box mounting but not holed

the osr tyre is cracking on the outer sid wall

Nearside Front Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Inner Front Upper Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

the exhaust tail pipe is corroded

the nsf and osf steps are corroded but not holed

the nsf chassis is corroded by the gear box mounting but not holed

the osr tyre is cracking on the outer sid wall

Brake pipe slightly corroded (3.6.B.2c)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

nearside front brake binding slightly

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear wheel bearing has slight play (2.6.2)

brake pipes need greasing